FAQ - K110-A

• Turn off the keyboard, press and hold ESC + 3, then turn it on. The channel indicator will flash rapidly then stay solid.
• Select a channel and connect to your device. Toggle Bluetooth off/on if you cannot find the keyboard.

Notes:

• If connection fails, restart keyboard & Bluetooth or delete duplicate device entries.
• Press the channel button to switch among paired devices.
• The keyboard remembers the last connected channel.
• Compatible only with macOS (not Linux/Windows).
• Devices before 2013 or macOS below 10.12 are unsupported.

• Mac devices older than 2013 or macOS below 10.12 are unsupported.
• Ensure the keyboard is fully charged.
• Check channel indicator behavior.
• Delete old Bluetooth entries and restart your device.
• Re-pair following the pairing steps.
• Test the keyboard on another device.
• If still failing, reset the Bluetooth connection.

• Fully charge the keyboard.
• Delete Bluetooth history & restart the Mac.
• Pair again by searching for “K110-A Keyboard”.
• Test with another device if the issue persists.

• Low battery indicator flashes red once per second.
• Charging: red (charging) → green (full).
• Full charge time: approx. 3-4 hours.

Notes:

• Low battery may cause performance lag.
• If over-discharged, charge 10 minutes or replug repeatedly to reactivate.

• No use for 60 minutes → sleep mode.
• Press any key to wake within ~3 seconds.

• Multimedia keys can be used directly.
• F1-F12 require Fn + key.

• Disable screenshot key (Command + 3): macOS → System Settings → Keyboard → Shortcuts → Screenshots → disable Command + 3.
• Enable/Disable numeric keypad: Press “Clear”.